Save up to S$500 storewide — automatically applied at checkout.
Free Standard Delivery, No Minimum Spend
Can You Put a Bed in Front of a Window?
Posted by liyue posted on October 01, 2026
A bed can go in front of a window. The arrangement is worth considering when it frees the wall you need for a wardrobe or gives both sleepers an easier way out of bed. But the window still has a job to do, even with a headboard in front of it.
Start with the window open and the curtains drawn back. If you can use both comfortably from the proposed bed position, you have a layout worth exploring. If you would have to climb across the mattress every morning, another wall deserves a second look.
Work out what the headboard would actually cover
A high window above the bed is a different proposition from glazing that starts near the floor. Measure the sill and window handles from the floor, then compare them with the complete height and width of the frame. When browsing Casa Lusso's beds and bed frames, use the outer dimensions rather than the mattress size.
Include the window's movement. A sliding panel may stay within the window frame, while an inward-opening section needs clear space in front. Even with an outward-opening window, you still need to reach the handle and operate any latch. Test the action with the proposed headboard outline marked in place.
Being below the sill is helpful, but it does not settle the layout. A deep headboard can keep you too far from the handle; a bedside table can occupy the only place where you could stand. Check the whole route from your feet to your hand.
If the headboard would cover part of the glass, decide whether you are comfortable losing that part of the view and daylight. Look from the doorway and from the pillow position. Avoid choosing a taller headboard merely to make the window disappear behind it.
Give the curtains their own space
With full-length curtains behind the bed, the fabric needs to travel across the window without being pinched between the frame and the wall. Draw both the day curtains and the heavier curtains if you have two layers. The folded stack at the side can occupy more depth than the fabric does when spread flat.
Try this before deciding how close the bed can sit. Pull the curtains as you normally would, including the last section near the middle. Check that the edge does not catch on a headboard corner or gather on the mattress.
There is no useful universal gap to copy. The curtain folds, track position and headboard depth determine it. Leave enough space for the actual curtains to move freely and for you to reach them. If that pushes the bed too far into the room, reconsider the bed wall or the window treatment before ordering the frame.
A blind within the window recess may reduce the fabric behind the bed, but its controls must remain accessible. Changing the window treatment is a separate decision; do not assume the existing curtain track can take whichever solution looks best in a photograph.
The Wavira's top edge rises and falls, with a rounded post at the side. Include the highest points and outer corners when checking a window or curtain route. This display is against a solid backdrop.
Every gap behind the bed comes out of the room in front
Suppose the bed works beside the window only after you bring it forward. That move uses the same amount of floor space at the foot. A layout that looked generous on paper can then leave a wardrobe drawer opening straight into the bed.
Mark the entire proposed bed footprint on the floor, starting at its new position in front of the curtains. Open the bedroom door and any furniture facing the foot. Walk between the bed and wardrobe while the wardrobe is in use, rather than judging the gap with everything closed.
For example, a frame 193 cm long with its rear edge 15 cm out from a reference wall would reach 208 cm into the room. The 15 cm is only an illustration, not a recommended curtain clearance. Your room may need a different offset, and a projecting sill can change where you measure from.
A frame to measure against the window: Wavira
The Wavira Bed is listed at W153 × D193 × H120 cm overall in the Queen version, for a W152 × D191 cm mattress. Its frame uses natural white oak veneer, with solid ash legs.
Mark the full 120 cm height against your window before considering it for this position. A lower sill would mean part of the frame overlaps the window area. Its relatively close-fitting footprint around the listed Queen mattress does not establish that the headboard clears your handles or curtain folds.
The 150 × 200 cm mattress version has different outer dimensions: W151 × D202 × H120 cm. Use the measurements for the exact version you are considering; in this case, it extends 9 cm farther into the room than the Queen version.
Allow for the complete frame, including the footboard. The photograph shows the design, not a tested installation in front of a window.
The bed does not have to follow the window's centre line
An off-centre window can make the bed look misplaced even when the bed itself is in a sensible position. Try the practical layout first. Moving the bed to line up with the window may leave one sleeper squeezed against a wardrobe or remove space for a bedside surface.
Keep the bedding fairly quiet while comparing positions; a strong pattern can make the competing lines harder to judge. Take a photograph with the curtains open, then closed. You live with both views.
A curtain arrangement covering a wider part of the wall can soften the asymmetry, but it also needs more fabric and room to gather. It is an option to discuss if you are already changing the curtains, not a reason to buy new ones before trying the bed position. For the wider question of daily access, see bed against the wall or centred.
When another wall is the better choice
Keep the bed away from a window area with unresolved leaks or recurring moisture. Leave it accessible while the cause is addressed. Moving a headboard in front of the patch would only make it harder to inspect.
A deep bay window needs separate planning too. The ledge may hold the bed away from the glass without leaving anywhere useful to stand. A photograph of a bed built into a bay does not prove that a freestanding frame will fit around the same projection. Keep the frame supported as its assembly instructions require.
Before committing, use the window in the evening as well as during the day. Close the curtains, reach the latch and stand where each sleeper will get out. If one of those ordinary jobs becomes awkward, move the bed outline now, while changing the plan costs nothing.
Can You Put a Bed in Front of a Window?
A bed can go in front of a window. The arrangement is worth considering when it frees the wall you need for a wardrobe or gives both sleepers an easier way out of bed. But the window still has a job to do, even with a headboard in front of it.
Start with the window open and the curtains drawn back. If you can use both comfortably from the proposed bed position, you have a layout worth exploring. If you would have to climb across the mattress every morning, another wall deserves a second look.
Work out what the headboard would actually cover
A high window above the bed is a different proposition from glazing that starts near the floor. Measure the sill and window handles from the floor, then compare them with the complete height and width of the frame. When browsing Casa Lusso's beds and bed frames, use the outer dimensions rather than the mattress size.
Include the window's movement. A sliding panel may stay within the window frame, while an inward-opening section needs clear space in front. Even with an outward-opening window, you still need to reach the handle and operate any latch. Test the action with the proposed headboard outline marked in place.
Being below the sill is helpful, but it does not settle the layout. A deep headboard can keep you too far from the handle; a bedside table can occupy the only place where you could stand. Check the whole route from your feet to your hand.
If the headboard would cover part of the glass, decide whether you are comfortable losing that part of the view and daylight. Look from the doorway and from the pillow position. Avoid choosing a taller headboard merely to make the window disappear behind it.
Give the curtains their own space
With full-length curtains behind the bed, the fabric needs to travel across the window without being pinched between the frame and the wall. Draw both the day curtains and the heavier curtains if you have two layers. The folded stack at the side can occupy more depth than the fabric does when spread flat.
Try this before deciding how close the bed can sit. Pull the curtains as you normally would, including the last section near the middle. Check that the edge does not catch on a headboard corner or gather on the mattress.
There is no useful universal gap to copy. The curtain folds, track position and headboard depth determine it. Leave enough space for the actual curtains to move freely and for you to reach them. If that pushes the bed too far into the room, reconsider the bed wall or the window treatment before ordering the frame.
A blind within the window recess may reduce the fabric behind the bed, but its controls must remain accessible. Changing the window treatment is a separate decision; do not assume the existing curtain track can take whichever solution looks best in a photograph.
Every gap behind the bed comes out of the room in front
Suppose the bed works beside the window only after you bring it forward. That move uses the same amount of floor space at the foot. A layout that looked generous on paper can then leave a wardrobe drawer opening straight into the bed.
Mark the entire proposed bed footprint on the floor, starting at its new position in front of the curtains. Open the bedroom door and any furniture facing the foot. Walk between the bed and wardrobe while the wardrobe is in use, rather than judging the gap with everything closed.
For example, a frame 193 cm long with its rear edge 15 cm out from a reference wall would reach 208 cm into the room. The 15 cm is only an illustration, not a recommended curtain clearance. Your room may need a different offset, and a projecting sill can change where you measure from.
A frame to measure against the window: Wavira
The Wavira Bed is listed at W153 × D193 × H120 cm overall in the Queen version, for a W152 × D191 cm mattress. Its frame uses natural white oak veneer, with solid ash legs.
Mark the full 120 cm height against your window before considering it for this position. A lower sill would mean part of the frame overlaps the window area. Its relatively close-fitting footprint around the listed Queen mattress does not establish that the headboard clears your handles or curtain folds.
The 150 × 200 cm mattress version has different outer dimensions: W151 × D202 × H120 cm. Use the measurements for the exact version you are considering; in this case, it extends 9 cm farther into the room than the Queen version.
View Wavira sizesThe bed does not have to follow the window's centre line
An off-centre window can make the bed look misplaced even when the bed itself is in a sensible position. Try the practical layout first. Moving the bed to line up with the window may leave one sleeper squeezed against a wardrobe or remove space for a bedside surface.
Keep the bedding fairly quiet while comparing positions; a strong pattern can make the competing lines harder to judge. Take a photograph with the curtains open, then closed. You live with both views.
A curtain arrangement covering a wider part of the wall can soften the asymmetry, but it also needs more fabric and room to gather. It is an option to discuss if you are already changing the curtains, not a reason to buy new ones before trying the bed position. For the wider question of daily access, see bed against the wall or centred.
When another wall is the better choice
Keep the bed away from a window area with unresolved leaks or recurring moisture. Leave it accessible while the cause is addressed. Moving a headboard in front of the patch would only make it harder to inspect.
A deep bay window needs separate planning too. The ledge may hold the bed away from the glass without leaving anywhere useful to stand. A photograph of a bed built into a bay does not prove that a freestanding frame will fit around the same projection. Keep the frame supported as its assembly instructions require.
Before committing, use the window in the evening as well as during the day. Close the curtains, reach the latch and stand where each sleeper will get out. If one of those ordinary jobs becomes awkward, move the bed outline now, while changing the plan costs nothing.